Materials

Materials by process

What we offer for 3D printing, SLA resin, and CNC machining. The FDM, resin and CNC selectors help you narrow it down.

Not sure which process? See Resin or filament: how to choose.

3D Printing (FDM)

Thermoplastic filament printing, from everyday PLA to PEEK and PEI (Ultem).

Open the FDM material selector

Standard

5 materials

Engineering

5 materials

Flexible

5 materials

High-temp and specialty

8 materials

SLA Resin

Stereolithography for fine detail and smooth surfaces.

Pick the resin and the detail level on the quote page. Lead times are on the turnaround page.

Open the resin material selector
Resin families 9 materials

General purpose resin

Formlabs general purpose resins, among them Formlabs Grey V5, Formlabs Clear V5, and Formlabs Color V5, are stiff, strong plastics with crisp fine detail and a smooth surface, matte or clear.

Learn more

Tough and durable resin

Formlabs Tough 1500 V2, Formlabs Tough 2000 V2, and Formlabs Tough 1000 resist shattering, with strength and stiffness comparable to polypropylene, ABS, and HDPE, in that order.

Learn more

Rigid resin

Formlabs Rigid 4000 and Formlabs Rigid 10K are glass-filled and very stiff, with a smooth white finish; Formlabs Rigid 10K is the stiffer of the pair.

Learn more

High temp resin

Formlabs High Temp is a heat-resistant resin, stiff and translucent, that prints detailed, precise parts.

Learn more

Flame retardant resin

Formlabs Flame Retardant is a stiff, halogen-free resin that self-extinguishes and resists heat and creep over the long term.

Learn more

ESD-safe resin

Formlabs ESD is a static-dissipative resin that repels dust and powder and has stiffness similar to ABS.

Learn more

Flexible and elastic resin

Formlabs Flexible 80A V2 and Formlabs Flexible 80A V1 are firm elastomers comparable to TPU or hard rubber, and Formlabs Flexible 50A is softer; all three withstand repeated bending and compression.

Learn more

Silicone resin

Formlabs Silicone 40A is pure silicone: soft, pliable, and durable through repeated stretching, flexing, and compression.

Learn more

Castable resin

Formlabs Clear Cast and the wax-filled Formlabs True Cast and Formlabs Castable Wax all burn out cleanly and leave little or no ash.

Learn more

CNC Machining

Milled and turned parts in metals and machinable plastics, one-offs through small production runs.

Request a custom quote for machining on the quote page. Lead times are on the turnaround page.

Open the machining material selector

Aluminum

6 materials

Steel

8 materials

Stainless steel

8 materials

Brass, bronze and copper

5 materials

Plastics

11 materials

Delrin (acetal)

Polyoxymethylene, an acetal homopolymer, is stiff, hard and low in friction and wear, and its low water uptake keeps it dimensionally stable.

See it in the selector

Nylon 6/6

Polyamide 66 is strong, stiff, hard and tough. It resists wear and fatigue and is a good electrical insulator.

See it in the selector

Cast nylon 6

Cast polyamide 6 is strong, tough and slippery, resists wear, damps noise and weighs far less than bronze. In Nylatron GSM, molybdenum disulfide lets it carry heavier loads.

See it in the selector

UHMW-PE

Ultra-high-molecular-weight polyethylene is slick, takes hard knocks and resists wear and abrasion exceptionally well, with very good chemical resistance.

See it in the selector

HDPE

High-density polyethylene is tough and takes on almost no moisture, and it resists many acids, greases and waxes.

See it in the selector

PTFE (Teflon)

Polytetrafluoroethylene is slick and non-stick, resists almost every chemical, insulates well and works from deep cold to high heat.

See it in the selector

Polycarbonate

Polycarbonate is far tougher than acrylic, keeps its impact strength in the cold and insulates well.

See it in the selector

Acrylic

Polymethyl methacrylate is clear and rigid, and it weathers sun, rain and snow without yellowing.

See it in the selector

Rigid PVC

Unplasticized polyvinyl chloride is hard and strong, with excellent resistance to acids, alkalis and corrosion.

See it in the selector

PEEK

Polyether ether ketone is strong and stiff, slides well, resists wear and creep, and absorbs little moisture.

See it in the selector

Ultem 1000

Polyetherimide is a strong, dimensionally stable, translucent amber plastic that resists creep and insulates well.

See it in the selector

Composites

2 materials

Not sure what your part needs?

Ask us